|
Linux altar53.supremepanel53.com 4.18.0-553.8.1.lve.el8.x86_64 #1 SMP Thu Jul 4 16:24:39 UTC 2024 x86_64
/ usr/ share/ perl5/ IO/ Compress/ |
|
|
package IO::Compress::Zip ;
use strict ;
use warnings;
use bytes;
use IO::Compress::Base::Common 2.081 qw(:Status );
use IO::Compress::RawDeflate 2.081 ();
use IO::Compress::Adapter::Deflate 2.081 ;
use IO::Compress::Adapter::Identity 2.081 ;
use IO::Compress::Zlib::Extra 2.081 ;
use IO::Compress::Zip::Constants 2.081 ;
use File::Spec();
use Config;
use Compress::Raw::Zlib 2.081 ();
BEGIN
{
eval { require IO::Compress::Adapter::Bzip2 ;
import IO::Compress::Adapter::Bzip2 2.081 ;
require IO::Compress::Bzip2 ;
import IO::Compress::Bzip2 2.081 ;
} ;
eval { require IO::Compress::Adapter::Lzma ;
import IO::Compress::Adapter::Lzma 2.081 ;
require IO::Compress::Lzma ;
import IO::Compress::Lzma 2.081 ;
} ;
}
require Exporter ;
our ($VERSION, @ISA, @EXPORT_OK, %EXPORT_TAGS, %DEFLATE_CONSTANTS, $ZipError);
$VERSION = '2.081';
$ZipError = '';
@ISA = qw(IO::Compress::RawDeflate Exporter);
@EXPORT_OK = qw( $ZipError zip ) ;
%EXPORT_TAGS = %IO::Compress::RawDeflate::DEFLATE_CONSTANTS ;
push @{ $EXPORT_TAGS{all} }, @EXPORT_OK ;
$EXPORT_TAGS{zip_method} = [qw( ZIP_CM_STORE ZIP_CM_DEFLATE ZIP_CM_BZIP2 ZIP_CM_LZMA)];
push @{ $EXPORT_TAGS{all} }, @{ $EXPORT_TAGS{zip_method} };
Exporter::export_ok_tags('all');
sub new
{
my $class = shift ;
my $obj = IO::Compress::Base::Common::createSelfTiedObject($class, \$ZipError);
$obj->_create(undef, @_);
}
sub zip
{
my $obj = IO::Compress::Base::Common::createSelfTiedObject(undef, \$ZipError);
return $obj->_def(@_);
}
sub isMethodAvailable
{
my $method = shift;
# Store & Deflate are always available
return 1
if $method == ZIP_CM_STORE || $method == ZIP_CM_DEFLATE ;
return 1
if $method == ZIP_CM_BZIP2 and
defined $IO::Compress::Adapter::Bzip2::VERSION;
return 1
if $method == ZIP_CM_LZMA and
defined $IO::Compress::Adapter::Lzma::VERSION;
return 0;
}
sub beforePayload
{
my $self = shift ;
if (*$self->{ZipData}{Sparse} ) {
my $inc = 1024 * 100 ;
my $NULLS = ("\x00" x $inc) ;
my $sparse = *$self->{ZipData}{Sparse} ;
*$self->{CompSize}->add( $sparse );
*$self->{UnCompSize}->add( $sparse );
*$self->{FH}->seek($sparse, IO::Handle::SEEK_CUR);
*$self->{ZipData}{CRC32} = Compress::Raw::Zlib::crc32($NULLS, *$self->{ZipData}{CRC32})
for 1 .. int $sparse / $inc;
*$self->{ZipData}{CRC32} = Compress::Raw::Zlib::crc32(substr($NULLS, 0, $sparse % $inc),
*$self->{ZipData}{CRC32})
if $sparse % $inc;
}
}
sub mkComp
{
my $self = shift ;
my $got = shift ;
my ($obj, $errstr, $errno) ;
if (*$self->{ZipData}{Method} == ZIP_CM_STORE) {
($obj, $errstr, $errno) = IO::Compress::Adapter::Identity::mkCompObject(
$got->getValue('level'),
$got->getValue('strategy')
);
*$self->{ZipData}{CRC32} = Compress::Raw::Zlib::crc32(undef);
}
elsif (*$self->{ZipData}{Method} == ZIP_CM_DEFLATE) {
($obj, $errstr, $errno) = IO::Compress::Adapter::Deflate::mkCompObject(
$got->getValue('crc32'),
$got->getValue('adler32'),
$got->getValue('level'),
$got->getValue('strategy')
);
}
elsif (*$self->{ZipData}{Method} == ZIP_CM_BZIP2) {
($obj, $errstr, $errno) = IO::Compress::Adapter::Bzip2::mkCompObject(
$got->getValue('blocksize100k'),
$got->getValue('workfactor'),
$got->getValue('verbosity')
);
*$self->{ZipData}{CRC32} = Compress::Raw::Zlib::crc32(undef);
}
elsif (*$self->{ZipData}{Method} == ZIP_CM_LZMA) {
($obj, $errstr, $errno) = IO::Compress::Adapter::Lzma::mkRawZipCompObject($got->getValue('preset'),
$got->getValue('extreme'),
);
*$self->{ZipData}{CRC32} = Compress::Raw::Zlib::crc32(undef);
}
return $self->saveErrorString(undef, $errstr, $errno)
if ! defined $obj;
if (! defined *$self->{ZipData}{SizesOffset}) {
*$self->{ZipData}{SizesOffset} = 0;
*$self->{ZipData}{Offset} = new U64 ;
}
*$self->{ZipData}{AnyZip64} = 0
if ! defined *$self->{ZipData}{AnyZip64} ;
return $obj;
}
sub reset
{
my $self = shift ;
*$self->{Compress}->reset();
*$self->{ZipData}{CRC32} = Compress::Raw::Zlib::crc32('');
return STATUS_OK;
}
sub filterUncompressed
{
my $self = shift ;
if (*$self->{ZipData}{Method} == ZIP_CM_DEFLATE) {
*$self->{ZipData}{CRC32} = *$self->{Compress}->crc32();
}
else {
*$self->{ZipData}{CRC32} = Compress::Raw::Zlib::crc32(${$_[0]}, *$self->{ZipData}{CRC32});
}
}
sub canonicalName
{
# This sub is derived from Archive::Zip::_asZipDirName
# Return the normalized name as used in a zip file (path
# separators become slashes, etc.).
# Will translate internal slashes in path components (i.e. on Macs) to
# underscores. Discards volume names.
# When $forceDir is set, returns paths with trailing slashes
#
# input output
# . '.'
# ./a a
# ./a/b a/b
# ./a/b/ a/b
# a/b/ a/b
# /a/b/ a/b
# c:\a\b\c.doc a/b/c.doc # on Windows
# "i/o maps:whatever" i_o maps/whatever # on Macs
my $name = shift;
my $forceDir = shift ;
my ( $volume, $directories, $file ) =
File::Spec->splitpath( File::Spec->canonpath($name), $forceDir );
my @dirs = map { $_ =~ s{/}{_}g; $_ }
File::Spec->splitdir($directories);
if ( @dirs > 0 ) { pop (@dirs) if $dirs[-1] eq '' } # remove empty component
push @dirs, defined($file) ? $file : '' ;
my $normalised_path = join '/', @dirs;
# Leading directory separators should not be stored in zip archives.
# Example:
# C:\a\b\c\ a/b/c
# C:\a\b\c.txt a/b/c.txt
# /a/b/c/ a/b/c
# /a/b/c.txt a/b/c.txt
$normalised_path =~ s{^/}{}; # remove leading separator
return $normalised_path;
}
sub mkHeader
{
my $self = shift;
my $param = shift ;
*$self->{ZipData}{LocalHdrOffset} = U64::clone(*$self->{ZipData}{Offset});
my $comment = '';
$comment = $param->valueOrDefault('comment') ;
my $filename = '';
$filename = $param->valueOrDefault('name') ;
$filename = canonicalName($filename)
if length $filename && $param->getValue('canonicalname') ;
if (defined *$self->{ZipData}{FilterName} ) {
local *_ = \$filename ;
&{ *$self->{ZipData}{FilterName} }() ;
}
# if ( $param->getValue('utf8') ) {
# require Encode ;
# $filename = Encode::encode_utf8($filename)
# if length $filename ;
# $comment = Encode::encode_utf8($comment)
# if length $comment ;
# }
my $hdr = '';
my $time = _unixToDosTime($param->getValue('time'));
my $extra = '';
my $ctlExtra = '';
my $empty = 0;
my $osCode = $param->getValue('os_code') ;
my $extFileAttr = 0 ;
# This code assumes Unix.
# TODO - revisit this
$extFileAttr = 0100644 << 16
if $osCode == ZIP_OS_CODE_UNIX ;
if (*$self->{ZipData}{Zip64}) {
$empty = IO::Compress::Base::Common::MAX32;
my $x = '';
$x .= pack "V V", 0, 0 ; # uncompressedLength
$x .= pack "V V", 0, 0 ; # compressedLength
# Zip64 needs to be first in extra field to workaround a Windows Explorer Bug
# See http://www.info-zip.org/phpBB3/viewtopic.php?f=3&t=440 for details
$extra .= IO::Compress::Zlib::Extra::mkSubField(ZIP_EXTRA_ID_ZIP64, $x);
}
if (! $param->getValue('minimal')) {
if ($param->parsed('mtime'))
{
$extra .= mkExtendedTime($param->getValue('mtime'),
$param->getValue('atime'),
$param->getValue('ctime'));
$ctlExtra .= mkExtendedTime($param->getValue('mtime'));
}
if ( $osCode == ZIP_OS_CODE_UNIX )
{
if ( $param->getValue('want_exunixn') )
{
my $ux3 = mkUnixNExtra( @{ $param->getValue('want_exunixn') });
$extra .= $ux3;
$ctlExtra .= $ux3;
}
if ( $param->getValue('exunix2') )
{
$extra .= mkUnix2Extra( @{ $param->getValue('exunix2') });
$ctlExtra .= mkUnix2Extra();
}
}
$extFileAttr = $param->getValue('extattr')
if defined $param->getValue('extattr') ;
$extra .= $param->getValue('extrafieldlocal')
if defined $param->getValue('extrafieldlocal');
$ctlExtra .= $param->getValue('extrafieldcentral')
if defined $param->getValue('extrafieldcentral');
}
my $method = *$self->{ZipData}{Method} ;
my $gpFlag = 0 ;
$gpFlag |= ZIP_GP_FLAG_STREAMING_MASK
if *$self->{ZipData}{Stream} ;
$gpFlag |= ZIP_GP_FLAG_LZMA_EOS_PRESENT
if $method == ZIP_CM_LZMA ;
# $gpFlag |= ZIP_GP_FLAG_LANGUAGE_ENCODING
# if $param->getValue('utf8') && (length($filename) || length($comment));
my $version = $ZIP_CM_MIN_VERSIONS{$method};
$version = ZIP64_MIN_VERSION
if ZIP64_MIN_VERSION > $version && *$self->{ZipData}{Zip64};
my $madeBy = ($param->getValue('os_code') << 8) + $version;
my $extract = $version;
*$self->{ZipData}{Version} = $version;
*$self->{ZipData}{MadeBy} = $madeBy;
my $ifa = 0;
$ifa |= ZIP_IFA_TEXT_MASK
if $param->getValue('textflag');
$hdr .= pack "V", ZIP_LOCAL_HDR_SIG ; # signature
$hdr .= pack 'v', $extract ; # extract Version & OS
$hdr .= pack 'v', $gpFlag ; # general purpose flag (set streaming mode)
$hdr .= pack 'v', $method ; # compression method (deflate)
$hdr .= pack 'V', $time ; # last mod date/time
$hdr .= pack 'V', 0 ; # crc32 - 0 when streaming
$hdr .= pack 'V', $empty ; # compressed length - 0 when streaming
$hdr .= pack 'V', $empty ; # uncompressed length - 0 when streaming
$hdr .= pack 'v', length $filename ; # filename length
$hdr .= pack 'v', length $extra ; # extra length
$hdr .= $filename ;
# Remember the offset for the compressed & uncompressed lengths in the
# local header.
if (*$self->{ZipData}{Zip64}) {
*$self->{ZipData}{SizesOffset} = *$self->{ZipData}{Offset}->get64bit()
+ length($hdr) + 4 ;
}
else {
*$self->{ZipData}{SizesOffset} = *$self->{ZipData}{Offset}->get64bit()
+ 18;
}
$hdr .= $extra ;
my $ctl = '';
$ctl .= pack "V", ZIP_CENTRAL_HDR_SIG ; # signature
$ctl .= pack 'v', $madeBy ; # version made by
$ctl .= pack 'v', $extract ; # extract Version
$ctl .= pack 'v', $gpFlag ; # general purpose flag (streaming mode)
$ctl .= pack 'v', $method ; # compression method (deflate)
$ctl .= pack 'V', $time ; # last mod date/time
$ctl .= pack 'V', 0 ; # crc32
$ctl .= pack 'V', $empty ; # compressed length
$ctl .= pack 'V', $empty ; # uncompressed length
$ctl .= pack 'v', length $filename ; # filename length
*$self->{ZipData}{ExtraOffset} = length $ctl;
*$self->{ZipData}{ExtraSize} = length $ctlExtra ;
$ctl .= pack 'v', length $ctlExtra ; # extra length
$ctl .= pack 'v', length $comment ; # file comment length
$ctl .= pack 'v', 0 ; # disk number start
$ctl .= pack 'v', $ifa ; # internal file attributes
$ctl .= pack 'V', $extFileAttr ; # external file attributes
# offset to local hdr
if (*$self->{ZipData}{LocalHdrOffset}->is64bit() ) {
$ctl .= pack 'V', IO::Compress::Base::Common::MAX32 ;
}
else {
$ctl .= *$self->{ZipData}{LocalHdrOffset}->getPacked_V32() ;
}
$ctl .= $filename ;
*$self->{ZipData}{Offset}->add32(length $hdr) ;
*$self->{ZipData}{CentralHeader} = [ $ctl, $ctlExtra, $comment];
return $hdr;
}
sub mkTrailer
{
my $self = shift ;
my $crc32 ;
if (*$self->{ZipData}{Method} == ZIP_CM_DEFLATE) {
$crc32 = pack "V", *$self->{Compress}->crc32();
}
else {
$crc32 = pack "V", *$self->{ZipData}{CRC32};
}
my ($ctl, $ctlExtra, $comment) = @{ *$self->{ZipData}{CentralHeader} };
my $sizes ;
if (! *$self->{ZipData}{Zip64}) {
$sizes .= *$self->{CompSize}->getPacked_V32() ; # Compressed size
$sizes .= *$self->{UnCompSize}->getPacked_V32() ; # Uncompressed size
}
else {
$sizes .= *$self->{CompSize}->getPacked_V64() ; # Compressed size
$sizes .= *$self->{UnCompSize}->getPacked_V64() ; # Uncompressed size
}
my $data = $crc32 . $sizes ;
my $xtrasize = *$self->{UnCompSize}->getPacked_V64() ; # Uncompressed size
$xtrasize .= *$self->{CompSize}->getPacked_V64() ; # Compressed size
my $hdr = '';
if (*$self->{ZipData}{Stream}) {
$hdr = pack "V", ZIP_DATA_HDR_SIG ; # signature
$hdr .= $data ;
}
else {
$self->writeAt(*$self->{ZipData}{LocalHdrOffset}->get64bit() + 14, $crc32)
or return undef;
$self->writeAt(*$self->{ZipData}{SizesOffset},
*$self->{ZipData}{Zip64} ? $xtrasize : $sizes)
or return undef;
}
# Central Header Record/Zip64 extended field
substr($ctl, 16, length $crc32) = $crc32 ;
my $zip64Payload = '';
# uncompressed length - only set zip64 if needed
if (*$self->{UnCompSize}->isAlmost64bit()) { # || *$self->{ZipData}{Zip64}) {
$zip64Payload .= *$self->{UnCompSize}->getPacked_V64() ;
} else {
substr($ctl, 24, 4) = *$self->{UnCompSize}->getPacked_V32() ;
}
# compressed length - only set zip64 if needed
if (*$self->{CompSize}->isAlmost64bit()) { # || *$self->{ZipData}{Zip64}) {
$zip64Payload .= *$self->{CompSize}->getPacked_V64() ;
} else {
substr($ctl, 20, 4) = *$self->{CompSize}->getPacked_V32() ;
}
# Local Header offset
$zip64Payload .= *$self->{ZipData}{LocalHdrOffset}->getPacked_V64()
if *$self->{ZipData}{LocalHdrOffset}->is64bit() ;
# disk no - always zero, so don't need to include it.
#$zip64Payload .= pack "V", 0 ;
my $zip64Xtra = '';
if (length $zip64Payload) {
$zip64Xtra = IO::Compress::Zlib::Extra::mkSubField(ZIP_EXTRA_ID_ZIP64, $zip64Payload);
substr($ctl, *$self->{ZipData}{ExtraOffset}, 2) =
pack 'v', *$self->{ZipData}{ExtraSize} + length $zip64Xtra;
*$self->{ZipData}{AnyZip64} = 1;
}
# Zip64 needs to be first in extra field to workaround a Windows Explorer Bug
# See http://www.info-zip.org/phpBB3/viewtopic.php?f=3&t=440 for details
$ctl .= $zip64Xtra . $ctlExtra . $comment;
*$self->{ZipData}{Offset}->add32(length($hdr));
*$self->{ZipData}{Offset}->add( *$self->{CompSize} );
push @{ *$self->{ZipData}{CentralDir} }, $ctl ;
return $hdr;
}
sub mkFinalTrailer
{
my $self = shift ;
my $comment = '';
$comment = *$self->{ZipData}{ZipComment} ;
my $cd_offset = *$self->{ZipData}{Offset}->get32bit() ; # offset to start central dir
my $entries = @{ *$self->{ZipData}{CentralDir} };
*$self->{ZipData}{AnyZip64} = 1
if *$self->{ZipData}{Offset}->is64bit || $entries >= 0xFFFF ;
my $cd = join '', @{ *$self->{ZipData}{CentralDir} };
my $cd_len = length $cd ;
my $z64e = '';
if ( *$self->{ZipData}{AnyZip64} ) {
my $v = *$self->{ZipData}{Version} ;
my $mb = *$self->{ZipData}{MadeBy} ;
$z64e .= pack 'v', $mb ; # Version made by
$z64e .= pack 'v', $v ; # Version to extract
$z64e .= pack 'V', 0 ; # number of disk
$z64e .= pack 'V', 0 ; # number of disk with central dir
$z64e .= U64::pack_V64 $entries ; # entries in central dir on this disk
$z64e .= U64::pack_V64 $entries ; # entries in central dir
$z64e .= U64::pack_V64 $cd_len ; # size of central dir
$z64e .= *$self->{ZipData}{Offset}->getPacked_V64() ; # offset to start central dir
$z64e = pack("V", ZIP64_END_CENTRAL_REC_HDR_SIG) # signature
. U64::pack_V64(length $z64e)
. $z64e ;
*$self->{ZipData}{Offset}->add32(length $cd) ;
$z64e .= pack "V", ZIP64_END_CENTRAL_LOC_HDR_SIG; # signature
$z64e .= pack 'V', 0 ; # number of disk with central dir
$z64e .= *$self->{ZipData}{Offset}->getPacked_V64() ; # offset to end zip64 central dir
$z64e .= pack 'V', 1 ; # Total number of disks
$cd_offset = IO::Compress::Base::Common::MAX32 ;
$cd_len = IO::Compress::Base::Common::MAX32 if IO::Compress::Base::Common::isGeMax32 $cd_len ;
$entries = 0xFFFF if $entries >= 0xFFFF ;
}
my $ecd = '';
$ecd .= pack "V", ZIP_END_CENTRAL_HDR_SIG ; # signature
$ecd .= pack 'v', 0 ; # number of disk
$ecd .= pack 'v', 0 ; # number of disk with central dir
$ecd .= pack 'v', $entries ; # entries in central dir on this disk
$ecd .= pack 'v', $entries ; # entries in central dir
$ecd .= pack 'V', $cd_len ; # size of central dir
$ecd .= pack 'V', $cd_offset ; # offset to start central dir
$ecd .= pack 'v', length $comment ; # zipfile comment length
$ecd .= $comment;
return $cd . $z64e . $ecd ;
}
sub ckParams
{
my $self = shift ;
my $got = shift;
$got->setValue('crc32' => 1);
if (! $got->parsed('time') ) {
# Modification time defaults to now.
$got->setValue('time' => time) ;
}
if ($got->parsed('extime') ) {
my $timeRef = $got->getValue('extime');
if ( defined $timeRef) {
return $self->saveErrorString(undef, "exTime not a 3-element array ref")
if ref $timeRef ne 'ARRAY' || @$timeRef != 3;
}
$got->setValue("mtime", $timeRef->[1]);
$got->setValue("atime", $timeRef->[0]);
$got->setValue("ctime", $timeRef->[2]);
}
# Unix2/3 Extended Attribute
for my $name (qw(exunix2 exunixn))
{
if ($got->parsed($name) ) {
my $idRef = $got->getValue($name);
if ( defined $idRef) {
return $self->saveErrorString(undef, "$name not a 2-element array ref")
if ref $idRef ne 'ARRAY' || @$idRef != 2;
}
$got->setValue("uid", $idRef->[0]);
$got->setValue("gid", $idRef->[1]);
$got->setValue("want_$name", $idRef);
}
}
*$self->{ZipData}{AnyZip64} = 1
if $got->getValue('zip64');
*$self->{ZipData}{Zip64} = $got->getValue('zip64');
*$self->{ZipData}{Stream} = $got->getValue('stream');
my $method = $got->getValue('method');
return $self->saveErrorString(undef, "Unknown Method '$method'")
if ! defined $ZIP_CM_MIN_VERSIONS{$method};
return $self->saveErrorString(undef, "Bzip2 not available")
if $method == ZIP_CM_BZIP2 and
! defined $IO::Compress::Adapter::Bzip2::VERSION;
return $self->saveErrorString(undef, "Lzma not available")
if $method == ZIP_CM_LZMA
and ! defined $IO::Compress::Adapter::Lzma::VERSION;
*$self->{ZipData}{Method} = $method;
*$self->{ZipData}{ZipComment} = $got->getValue('zipcomment') ;
for my $name (qw( extrafieldlocal extrafieldcentral ))
{
my $data = $got->getValue($name) ;
if (defined $data) {
my $bad = IO::Compress::Zlib::Extra::parseExtraField($data, 1, 0) ;
return $self->saveErrorString(undef, "Error with $name Parameter: $bad")
if $bad ;
$got->setValue($name, $data) ;
}
}
return undef
if defined $IO::Compress::Bzip2::VERSION
and ! IO::Compress::Bzip2::ckParams($self, $got);
if ($got->parsed('sparse') ) {
*$self->{ZipData}{Sparse} = $got->getValue('sparse') ;
*$self->{ZipData}{Method} = ZIP_CM_STORE;
}
if ($got->parsed('filtername')) {
my $v = $got->getValue('filtername') ;
*$self->{ZipData}{FilterName} = $v
if ref $v eq 'CODE' ;
}
return 1 ;
}
sub outputPayload
{
my $self = shift ;
return 1 if *$self->{ZipData}{Sparse} ;
return $self->output(@_);
}
#sub newHeader
#{
# my $self = shift ;
#
# return $self->mkHeader(*$self->{Got});
#}
our %PARAMS = (
'stream' => [IO::Compress::Base::Common::Parse_boolean, 1],
#'store' => [IO::Compress::Base::Common::Parse_boolean, 0],
'method' => [IO::Compress::Base::Common::Parse_unsigned, ZIP_CM_DEFLATE],
# # Zip header fields
'minimal' => [IO::Compress::Base::Common::Parse_boolean, 0],
'zip64' => [IO::Compress::Base::Common::Parse_boolean, 0],
'comment' => [IO::Compress::Base::Common::Parse_any, ''],
'zipcomment'=> [IO::Compress::Base::Common::Parse_any, ''],
'name' => [IO::Compress::Base::Common::Parse_any, ''],
'filtername'=> [IO::Compress::Base::Common::Parse_code, undef],
'canonicalname'=> [IO::Compress::Base::Common::Parse_boolean, 0],
# 'utf8' => [IO::Compress::Base::Common::Parse_boolean, 0],
'time' => [IO::Compress::Base::Common::Parse_any, undef],
'extime' => [IO::Compress::Base::Common::Parse_any, undef],
'exunix2' => [IO::Compress::Base::Common::Parse_any, undef],
'exunixn' => [IO::Compress::Base::Common::Parse_any, undef],
'extattr' => [IO::Compress::Base::Common::Parse_any,
$Compress::Raw::Zlib::gzip_os_code == 3
? 0100644 << 16
: 0],
'os_code' => [IO::Compress::Base::Common::Parse_unsigned, $Compress::Raw::Zlib::gzip_os_code],
'textflag' => [IO::Compress::Base::Common::Parse_boolean, 0],
'extrafieldlocal' => [IO::Compress::Base::Common::Parse_any, undef],
'extrafieldcentral'=> [IO::Compress::Base::Common::Parse_any, undef],
# Lzma
'preset' => [IO::Compress::Base::Common::Parse_unsigned, 6],
'extreme' => [IO::Compress::Base::Common::Parse_boolean, 0],
# For internal use only
'sparse' => [IO::Compress::Base::Common::Parse_unsigned, 0],
IO::Compress::RawDeflate::getZlibParams(),
defined $IO::Compress::Bzip2::VERSION
? IO::Compress::Bzip2::getExtraParams()
: ()
);
sub getExtraParams
{
return %PARAMS ;
}
sub getInverseClass
{
return ('IO::Uncompress::Unzip',
\$IO::Uncompress::Unzip::UnzipError);
}
sub getFileInfo
{
my $self = shift ;
my $params = shift;
my $filename = shift ;
if (IO::Compress::Base::Common::isaScalar($filename))
{
$params->setValue(zip64 => 1)
if IO::Compress::Base::Common::isGeMax32 length (${ $filename }) ;
return ;
}
my ($mode, $uid, $gid, $size, $atime, $mtime, $ctime) ;
if ( $params->parsed('storelinks') )
{
($mode, $uid, $gid, $size, $atime, $mtime, $ctime)
= (lstat($filename))[2, 4,5,7, 8,9,10] ;
}
else
{
($mode, $uid, $gid, $size, $atime, $mtime, $ctime)
= (stat($filename))[2, 4,5,7, 8,9,10] ;
}
$params->setValue(textflag => -T $filename )
if ! $params->parsed('textflag');
$params->setValue(zip64 => 1)
if IO::Compress::Base::Common::isGeMax32 $size ;
$params->setValue('name' => $filename)
if ! $params->parsed('name') ;
$params->setValue('time' => $mtime)
if ! $params->parsed('time') ;
if ( ! $params->parsed('extime'))
{
$params->setValue('mtime' => $mtime) ;
$params->setValue('atime' => $atime) ;
$params->setValue('ctime' => undef) ; # No Creation time
# TODO - see if can fillout creation time on non-Unix
}
# NOTE - Unix specific code alert
if (! $params->parsed('extattr'))
{
use Fcntl qw(:mode) ;
my $attr = $mode << 16;
$attr |= ZIP_A_RONLY if ($mode & S_IWRITE) == 0 ;
$attr |= ZIP_A_DIR if ($mode & S_IFMT ) == S_IFDIR ;
$params->setValue('extattr' => $attr);
}
$params->setValue('want_exunixn', [$uid, $gid]);
$params->setValue('uid' => $uid) ;
$params->setValue('gid' => $gid) ;
}
sub mkExtendedTime
{
# order expected is m, a, c
my $times = '';
my $bit = 1 ;
my $flags = 0;
for my $time (@_)
{
if (defined $time)
{
$flags |= $bit;
$times .= pack("V", $time);
}
$bit <<= 1 ;
}
return IO::Compress::Zlib::Extra::mkSubField(ZIP_EXTRA_ID_EXT_TIMESTAMP,
pack("C", $flags) . $times);
}
sub mkUnix2Extra
{
my $ids = '';
for my $id (@_)
{
$ids .= pack("v", $id);
}
return IO::Compress::Zlib::Extra::mkSubField(ZIP_EXTRA_ID_INFO_ZIP_UNIX2,
$ids);
}
sub mkUnixNExtra
{
my $uid = shift;
my $gid = shift;
# Assumes UID/GID are 32-bit
my $ids ;
$ids .= pack "C", 1; # version
$ids .= pack "C", $Config{uidsize};
$ids .= pack "V", $uid;
$ids .= pack "C", $Config{gidsize};
$ids .= pack "V", $gid;
return IO::Compress::Zlib::Extra::mkSubField(ZIP_EXTRA_ID_INFO_ZIP_UNIXN,
$ids);
}
# from Archive::Zip
sub _unixToDosTime # Archive::Zip::Member
{
my $time_t = shift;
# TODO - add something to cope with unix time < 1980
my ( $sec, $min, $hour, $mday, $mon, $year ) = localtime($time_t);
my $dt = 0;
$dt += ( $sec >> 1 );
$dt += ( $min << 5 );
$dt += ( $hour << 11 );
$dt += ( $mday << 16 );
$dt += ( ( $mon + 1 ) << 21 );
$dt += ( ( $year - 80 ) << 25 );
return $dt;
}
1;
__END__
=head1 NAME
IO::Compress::Zip - Write zip files/buffers
=head1 SYNOPSIS
use IO::Compress::Zip qw(zip $ZipError) ;
my $status = zip $input => $output [,OPTS]
or die "zip failed: $ZipError\n";
my $z = new IO::Compress::Zip $output [,OPTS]
or die "zip failed: $ZipError\n";
$z->print($string);
$z->printf($format, $string);
$z->write($string);
$z->syswrite($string [, $length, $offset]);
$z->flush();
$z->tell();
$z->eof();
$z->seek($position, $whence);
$z->binmode();
$z->fileno();
$z->opened();
$z->autoflush();
$z->input_line_number();
$z->newStream( [OPTS] );
$z->deflateParams();
$z->close() ;
$ZipError ;
# IO::File mode
print $z $string;
printf $z $format, $string;
tell $z
eof $z
seek $z, $position, $whence
binmode $z
fileno $z
close $z ;
=head1 DESCRIPTION
This module provides a Perl interface that allows writing zip
compressed data to files or buffer.
The primary purpose of this module is to provide streaming write access to
zip files and buffers. It is not a general-purpose file archiver. If that
is what you want, check out C<Archive::Zip>.
At present three compression methods are supported by IO::Compress::Zip,
namely Store (no compression at all), Deflate, Bzip2 and LZMA.
Note that to create Bzip2 content, the module C<IO::Compress::Bzip2> must
be installed.
Note that to create LZMA content, the module C<IO::Compress::Lzma> must
be installed.
For reading zip files/buffers, see the companion module
L<IO::Uncompress::Unzip|IO::Uncompress::Unzip>.
=head1 Functional Interface
A top-level function, C<zip>, is provided to carry out
"one-shot" compression between buffers and/or files. For finer
control over the compression process, see the L</"OO Interface">
section.
use IO::Compress::Zip qw(zip $ZipError) ;
zip $input_filename_or_reference => $output_filename_or_reference [,OPTS]
or die "zip failed: $ZipError\n";
The functional interface needs Perl5.005 or better.
=head2 zip $input_filename_or_reference => $output_filename_or_reference [, OPTS]
C<zip> expects at least two parameters,
C<$input_filename_or_reference> and C<$output_filename_or_reference>.
=head3 The C<$input_filename_or_reference> parameter
The parameter, C<$input_filename_or_reference>, is used to define the
source of the uncompressed data.
It can take one of the following forms:
=over 5
=item A filename
If the <$input_filename_or_reference> parameter is a simple scalar, it is
assumed to be a filename. This file will be opened for reading and the
input data will be read from it.
=item A filehandle
If the C<$input_filename_or_reference> parameter is a filehandle, the input
data will be read from it. The string '-' can be used as an alias for
standard input.
=item A scalar reference
If C<$input_filename_or_reference> is a scalar reference, the input data
will be read from C<$$input_filename_or_reference>.
=item An array reference
If C<$input_filename_or_reference> is an array reference, each element in
the array must be a filename.
The input data will be read from each file in turn.
The complete array will be walked to ensure that it only
contains valid filenames before any data is compressed.
=item An Input FileGlob string
If C<$input_filename_or_reference> is a string that is delimited by the
characters "<" and ">" C<zip> will assume that it is an
I<input fileglob string>. The input is the list of files that match the
fileglob.
See L<File::GlobMapper|File::GlobMapper> for more details.
=back
If the C<$input_filename_or_reference> parameter is any other type,
C<undef> will be returned.
In addition, if C<$input_filename_or_reference> is a simple filename,
the default values for
the C<Name>, C<Time>, C<TextFlag>, C<ExtAttr>, C<exUnixN> and C<exTime> options will be sourced from that file.
If you do not want to use these defaults they can be overridden by
explicitly setting the C<Name>, C<Time>, C<TextFlag>, C<ExtAttr>, C<exUnixN> and C<exTime> options or by setting the
C<Minimal> parameter.
=head3 The C<$output_filename_or_reference> parameter
The parameter C<$output_filename_or_reference> is used to control the
destination of the compressed data. This parameter can take one of
these forms.
=over 5
=item A filename
If the C<$output_filename_or_reference> parameter is a simple scalar, it is
assumed to be a filename. This file will be opened for writing and the
compressed data will be written to it.
=item A filehandle
If the C<$output_filename_or_reference> parameter is a filehandle, the
compressed data will be written to it. The string '-' can be used as
an alias for standard output.
=item A scalar reference
If C<$output_filename_or_reference> is a scalar reference, the
compressed data will be stored in C<$$output_filename_or_reference>.
=item An Array Reference
If C<$output_filename_or_reference> is an array reference,
the compressed data will be pushed onto the array.
=item An Output FileGlob
If C<$output_filename_or_reference> is a string that is delimited by the
characters "<" and ">" C<zip> will assume that it is an
I<output fileglob string>. The output is the list of files that match the
fileglob.
When C<$output_filename_or_reference> is an fileglob string,
C<$input_filename_or_reference> must also be a fileglob string. Anything
else is an error.
See L<File::GlobMapper|File::GlobMapper> for more details.
=back
If the C<$output_filename_or_reference> parameter is any other type,
C<undef> will be returned.
=head2 Notes
When C<$input_filename_or_reference> maps to multiple files/buffers and
C<$output_filename_or_reference> is a single
file/buffer the input files/buffers will each be stored
in C<$output_filename_or_reference> as a distinct entry.
=head2 Optional Parameters
Unless specified below, the optional parameters for C<zip>,
C<OPTS>, are the same as those used with the OO interface defined in the
L</"Constructor Options"> section below.
=over 5
=item C<< AutoClose => 0|1 >>
This option applies to any input or output data streams to
C<zip> that are filehandles.
If C<AutoClose> is specified, and the value is true, it will result in all
input and/or output filehandles being closed once C<zip> has
completed.
This parameter defaults to 0.
=item C<< BinModeIn => 0|1 >>
When reading from a file or filehandle, set C<binmode> before reading.
Defaults to 0.
=item C<< Append => 0|1 >>
The behaviour of this option is dependent on the type of output data
stream.
=over 5
=item * A Buffer
If C<Append> is enabled, all compressed data will be append to the end of
the output buffer. Otherwise the output buffer will be cleared before any
compressed data is written to it.
=item * A Filename
If C<Append> is enabled, the file will be opened in append mode. Otherwise
the contents of the file, if any, will be truncated before any compressed
data is written to it.
=item * A Filehandle
If C<Append> is enabled, the filehandle will be positioned to the end of
the file via a call to C<seek> before any compressed data is
written to it. Otherwise the file pointer will not be moved.
=back
When C<Append> is specified, and set to true, it will I<append> all compressed
data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof
before writing any compressed data. If the output is a filename, it will be opened for
appending. If the output is a buffer, all compressed data will be
appended to the existing buffer.
Conversely when C<Append> is not specified, or it is present and is set to
false, it will operate as follows.
When the output is a filename, it will truncate the contents of the file
before writing any compressed data. If the output is a filehandle
its position will not be changed. If the output is a buffer, it will be
wiped before any compressed data is output.
Defaults to 0.
=back
=head2 Examples
To read the contents of the file C<file1.txt> and write the compressed
data to the file C<file1.txt.zip>.
use strict ;
use warnings ;
use IO::Compress::Zip qw(zip $ZipError) ;
my $input = "file1.txt";
zip $input => "$input.zip"
or die "zip failed: $ZipError\n";
To read from an existing Perl filehandle, C<$input>, and write the
compressed data to a buffer, C<$buffer>.
use strict ;
use warnings ;
use IO::Compress::Zip qw(zip $ZipError) ;
use IO::File ;
my $input = new IO::File "<file1.txt"
or die "Cannot open 'file1.txt': $!\n" ;
my $buffer ;
zip $input => \$buffer
or die "zip failed: $ZipError\n";
To create a zip file, C<output.zip>, that contains the compressed contents
of the files C<alpha.txt> and C<beta.txt>
use strict ;
use warnings ;
use IO::Compress::Zip qw(zip $ZipError) ;
zip [ 'alpha.txt', 'beta.txt' ] => 'output.zip'
or die "zip failed: $ZipError\n";
Alternatively, rather than having to explicitly name each of the files that
you want to compress, you could use a fileglob to select all the C<txt>
files in the current directory, as follows
use strict ;
use warnings ;
use IO::Compress::Zip qw(zip $ZipError) ;
my @files = <*.txt>;
zip \@files => 'output.zip'
or die "zip failed: $ZipError\n";
or more succinctly
zip [ <*.txt> ] => 'output.zip'
or die "zip failed: $ZipError\n";
=head1 OO Interface
=head2 Constructor
The format of the constructor for C<IO::Compress::Zip> is shown below
my $z = new IO::Compress::Zip $output [,OPTS]
or die "IO::Compress::Zip failed: $ZipError\n";
It returns an C<IO::Compress::Zip> object on success and undef on failure.
The variable C<$ZipError> will contain an error message on failure.
If you are running Perl 5.005 or better the object, C<$z>, returned from
IO::Compress::Zip can be used exactly like an L<IO::File|IO::File> filehandle.
This means that all normal output file operations can be carried out
with C<$z>.
For example, to write to a compressed file/buffer you can use either of
these forms
$z->print("hello world\n");
print $z "hello world\n";
The mandatory parameter C<$output> is used to control the destination
of the compressed data. This parameter can take one of these forms.
=over 5
=item A filename
If the C<$output> parameter is a simple scalar, it is assumed to be a
filename. This file will be opened for writing and the compressed data
will be written to it.
=item A filehandle
If the C<$output> parameter is a filehandle, the compressed data will be
written to it.
The string '-' can be used as an alias for standard output.
=item A scalar reference
If C<$output> is a scalar reference, the compressed data will be stored
in C<$$output>.
=back
If the C<$output> parameter is any other type, C<IO::Compress::Zip>::new will
return undef.
=head2 Constructor Options
C<OPTS> is any combination of the following options:
=over 5
=item C<< AutoClose => 0|1 >>
This option is only valid when the C<$output> parameter is a filehandle. If
specified, and the value is true, it will result in the C<$output> being
closed once either the C<close> method is called or the C<IO::Compress::Zip>
object is destroyed.
This parameter defaults to 0.
=item C<< Append => 0|1 >>
Opens C<$output> in append mode.
The behaviour of this option is dependent on the type of C<$output>.
=over 5
=item * A Buffer
If C<$output> is a buffer and C<Append> is enabled, all compressed data
will be append to the end of C<$output>. Otherwise C<$output> will be
cleared before any data is written to it.
=item * A Filename
If C<$output> is a filename and C<Append> is enabled, the file will be
opened in append mode. Otherwise the contents of the file, if any, will be
truncated before any compressed data is written to it.
=item * A Filehandle
If C<$output> is a filehandle, the file pointer will be positioned to the
end of the file via a call to C<seek> before any compressed data is written
to it. Otherwise the file pointer will not be moved.
=back
This parameter defaults to 0.
=item C<< Name => $string >>
Stores the contents of C<$string> in the zip filename header field.
If C<Name> is not specified and the C<$input> parameter is a filename, the
value of C<$input> will be used for the zip filename header field.
If C<Name> is not specified and the C<$input> parameter is not a filename,
no zip filename field will be created.
Note that both the C<CanonicalName> and C<FilterName> options
can modify the value used for the zip filename header field.
=item C<< CanonicalName => 0|1 >>
This option controls whether the filename field in the zip header is
I<normalized> into Unix format before being written to the zip file.
It is recommended that you enable this option unless you really need
to create a non-standard Zip file.
This is what APPNOTE.TXT has to say on what should be stored in the zip
filename header field.
The name of the file, with optional relative path.
The path stored should not contain a drive or
device letter, or a leading slash. All slashes
should be forward slashes '/' as opposed to
backwards slashes '\' for compatibility with Amiga
and UNIX file systems etc.
This option defaults to B<false>.
=item C<< FilterName => sub { ... } >>
This option allow the filename field in the zip header to be modified
before it is written to the zip file.
This option takes a parameter that must be a reference to a sub. On entry
to the sub the C<$_> variable will contain the name to be filtered. If no
filename is available C<$_> will contain an empty string.
The value of C<$_> when the sub returns will be stored in the filename
header field.
Note that if C<CanonicalName> is enabled, a
normalized filename will be passed to the sub.
If you use C<FilterName> to modify the filename, it is your responsibility
to keep the filename in Unix format.
Although this option can be used with the OO interface, it is of most use
with the one-shot interface. For example, the code below shows how
C<FilterName> can be used to remove the path component from a series of
filenames before they are stored in C<$zipfile>.
sub compressTxtFiles
{
my $zipfile = shift ;
my $dir = shift ;
zip [ <$dir/*.txt> ] => $zipfile,
FilterName => sub { s[^$dir/][] } ;
}
=item C<< Time => $number >>
Sets the last modified time field in the zip header to $number.
This field defaults to the time the C<IO::Compress::Zip> object was created
if this option is not specified and the C<$input> parameter is not a
filename.
=item C<< ExtAttr => $attr >>
This option controls the "external file attributes" field in the central
header of the zip file. This is a 4 byte field.
If you are running a Unix derivative this value defaults to
0100644 << 16
This should allow read/write access to any files that are extracted from
the zip file/buffer`.
For all other systems it defaults to 0.
=item C<< exTime => [$atime, $mtime, $ctime] >>
This option expects an array reference with exactly three elements:
C<$atime>, C<mtime> and C<$ctime>. These correspond to the last access
time, last modification time and creation time respectively.
It uses these values to set the extended timestamp field (ID is "UT") in
the local zip header using the three values, $atime, $mtime, $ctime. In
addition it sets the extended timestamp field in the central zip header
using C<$mtime>.
If any of the three values is C<undef> that time value will not be used.
So, for example, to set only the C<$mtime> you would use this
exTime => [undef, $mtime, undef]
If the C<Minimal> option is set to true, this option will be ignored.
By default no extended time field is created.
=item C<< exUnix2 => [$uid, $gid] >>
This option expects an array reference with exactly two elements: C<$uid>
and C<$gid>. These values correspond to the numeric User ID (UID) and Group ID
(GID) of the owner of the files respectively.
When the C<exUnix2> option is present it will trigger the creation of a
Unix2 extra field (ID is "Ux") in the local zip header. This will be populated
with C<$uid> and C<$gid>. An empty Unix2 extra field will also
be created in the central zip header.
Note - The UID & GID are stored as 16-bit
integers in the "Ux" field. Use C<< exUnixN >> if your UID or GID are
32-bit.
If the C<Minimal> option is set to true, this option will be ignored.
By default no Unix2 extra field is created.
=item C<< exUnixN => [$uid, $gid] >>
This option expects an array reference with exactly two elements: C<$uid>
and C<$gid>. These values correspond to the numeric User ID (UID) and Group ID
(GID) of the owner of the files respectively.
When the C<exUnixN> option is present it will trigger the creation of a
UnixN extra field (ID is "ux") in both the local and central zip headers.
This will be populated with C<$uid> and C<$gid>.
The UID & GID are stored as 32-bit integers.
If the C<Minimal> option is set to true, this option will be ignored.
By default no UnixN extra field is created.
=item C<< Comment => $comment >>
Stores the contents of C<$comment> in the Central File Header of
the zip file.
By default, no comment field is written to the zip file.
=item C<< ZipComment => $comment >>
Stores the contents of C<$comment> in the End of Central Directory record
of the zip file.
By default, no comment field is written to the zip file.
=item C<< Method => $method >>
Controls which compression method is used. At present four compression
methods are supported, namely Store (no compression at all), Deflate,
Bzip2 and Lzma.
The symbols, ZIP_CM_STORE, ZIP_CM_DEFLATE, ZIP_CM_BZIP2 and ZIP_CM_LZMA
are used to select the compression method.
These constants are not imported by C<IO::Compress::Zip> by default.
use IO::Compress::Zip qw(:zip_method);
use IO::Compress::Zip qw(:constants);
use IO::Compress::Zip qw(:all);
Note that to create Bzip2 content, the module C<IO::Compress::Bzip2> must
be installed. A fatal error will be thrown if you attempt to create Bzip2
content when C<IO::Compress::Bzip2> is not available.
Note that to create Lzma content, the module C<IO::Compress::Lzma> must
be installed. A fatal error will be thrown if you attempt to create Lzma
content when C<IO::Compress::Lzma> is not available.
The default method is ZIP_CM_DEFLATE.
=item C<< Stream => 0|1 >>
This option controls whether the zip file/buffer output is created in
streaming mode.
Note that when outputting to a file with streaming mode disabled (C<Stream>
is 0), the output file must be seekable.
The default is 1.
=item C<< Zip64 => 0|1 >>
Create a Zip64 zip file/buffer. This option is used if you want
to store files larger than 4 Gig or store more than 64K files in a single
zip archive.
C<Zip64> will be automatically set, as needed, if working with the one-shot
interface when the input is either a filename or a scalar reference.
If you intend to manipulate the Zip64 zip files created with this module
using an external zip/unzip, make sure that it supports Zip64.
In particular, if you are using Info-Zip you need to have zip version 3.x
or better to update a Zip64 archive and unzip version 6.x to read a zip64
archive.
The default is 0.
=item C<< TextFlag => 0|1 >>
This parameter controls the setting of a bit in the zip central header. It
is used to signal that the data stored in the zip file/buffer is probably
text.
In one-shot mode this flag will be set to true if the Perl C<-T> operator thinks
the file contains text.
The default is 0.
=item C<< ExtraFieldLocal => $data >>
=item C<< ExtraFieldCentral => $data >>
The C<ExtraFieldLocal> option is used to store additional metadata in the
local header for the zip file/buffer. The C<ExtraFieldCentral> does the
same for the matching central header.
An extra field consists of zero or more subfields. Each subfield consists
of a two byte header followed by the subfield data.
The list of subfields can be supplied in any of the following formats
ExtraFieldLocal => [$id1, $data1,
$id2, $data2,
...
]
ExtraFieldLocal => [ [$id1 => $data1],
[$id2 => $data2],
...
]
ExtraFieldLocal => { $id1 => $data1,
$id2 => $data2,
...
}
Where C<$id1>, C<$id2> are two byte subfield ID's.
If you use the hash syntax, you have no control over the order in which
the ExtraSubFields are stored, plus you cannot have SubFields with
duplicate ID.
Alternatively the list of subfields can by supplied as a scalar, thus
ExtraField => $rawdata
In this case C<IO::Compress::Zip> will check that C<$rawdata> consists of
zero or more conformant sub-fields.
The Extended Time field (ID "UT"), set using the C<exTime> option, and the
Unix2 extra field (ID "Ux), set using the C<exUnix2> option, are examples
of extra fields.
If the C<Minimal> option is set to true, this option will be ignored.
The maximum size of an extra field 65535 bytes.
=item C<< Minimal => 1|0 >>
If specified, this option will disable the creation of all extra fields
in the zip local and central headers. So the C<exTime>, C<exUnix2>,
C<exUnixN>, C<ExtraFieldLocal> and C<ExtraFieldCentral> options will
be ignored.
This parameter defaults to 0.
=item C<< BlockSize100K => number >>
Specify the number of 100K blocks bzip2 uses during compression.
Valid values are from 1 to 9, where 9 is best compression.
This option is only valid if the C<Method> is ZIP_CM_BZIP2. It is ignored
otherwise.
The default is 1.
=item C<< WorkFactor => number >>
Specifies how much effort bzip2 should take before resorting to a slower
fallback compression algorithm.
Valid values range from 0 to 250, where 0 means use the default value 30.
This option is only valid if the C<Method> is ZIP_CM_BZIP2. It is ignored
otherwise.
The default is 0.
=item C<< Preset => number >>
Used to choose the LZMA compression preset.
Valid values are 0-9 and C<LZMA_PRESET_DEFAULT>.
0 is the fastest compression with the lowest memory usage and the lowest
compression.
9 is the slowest compression with the highest memory usage but with the best
compression.
This option is only valid if the C<Method> is ZIP_CM_LZMA. It is ignored
otherwise.
Defaults to C<LZMA_PRESET_DEFAULT> (6).
=item C<< Extreme => 0|1 >>
Makes LZMA compression a lot slower, but a small compression gain.
This option is only valid if the C<Method> is ZIP_CM_LZMA. It is ignored
otherwise.
Defaults to 0.
=item -Level
Defines the compression level used by zlib. The value should either be
a number between 0 and 9 (0 means no compression and 9 is maximum
compression), or one of the symbolic constants defined below.
Z_NO_COMPRESSION
Z_BEST_SPEED
Z_BEST_COMPRESSION
Z_DEFAULT_COMPRESSION
The default is Z_DEFAULT_COMPRESSION.
Note, these constants are not imported by C<IO::Compress::Zip> by default.
use IO::Compress::Zip qw(:strategy);
use IO::Compress::Zip qw(:constants);
use IO::Compress::Zip qw(:all);
=item -Strategy
Defines the strategy used to tune the compression. Use one of the symbolic
constants defined below.
Z_FILTERED
Z_HUFFMAN_ONLY
Z_RLE
Z_FIXED
Z_DEFAULT_STRATEGY
The default is Z_DEFAULT_STRATEGY.
=item C<< Strict => 0|1 >>
This is a placeholder option.
=back
=head2 Examples
TODO
=head1 Methods
=head2 print
Usage is
$z->print($data)
print $z $data
Compresses and outputs the contents of the C<$data> parameter. This
has the same behaviour as the C<print> built-in.
Returns true if successful.
=head2 printf
Usage is
$z->printf($format, $data)
printf $z $format, $data
Compresses and outputs the contents of the C<$data> parameter.
Returns true if successful.
=head2 syswrite
Usage is
$z->syswrite $data
$z->syswrite $data, $length
$z->syswrite $data, $length, $offset
Compresses and outputs the contents of the C<$data> parameter.
Returns the number of uncompressed bytes written, or C<undef> if
unsuccessful.
=head2 write
Usage is
$z->write $data
$z->write $data, $length
$z->write $data, $length, $offset
Compresses and outputs the contents of the C<$data> parameter.
Returns the number of uncompressed bytes written, or C<undef> if
unsuccessful.
=head2 flush
Usage is
$z->flush;
$z->flush($flush_type);
Flushes any pending compressed data to the output file/buffer.
This method takes an optional parameter, C<$flush_type>, that controls
how the flushing will be carried out. By default the C<$flush_type>
used is C<Z_FINISH>. Other valid values for C<$flush_type> are
C<Z_NO_FLUSH>, C<Z_SYNC_FLUSH>, C<Z_FULL_FLUSH> and C<Z_BLOCK>. It is
strongly recommended that you only set the C<flush_type> parameter if
you fully understand the implications of what it does - overuse of C<flush>
can seriously degrade the level of compression achieved. See the C<zlib>
documentation for details.
Returns true on success.
=head2 tell
Usage is
$z->tell()
tell $z
Returns the uncompressed file offset.
=head2 eof
Usage is
$z->eof();
eof($z);
Returns true if the C<close> method has been called.
=head2 seek
$z->seek($position, $whence);
seek($z, $position, $whence);
Provides a sub-set of the C<seek> functionality, with the restriction
that it is only legal to seek forward in the output file/buffer.
It is a fatal error to attempt to seek backward.
Empty parts of the file/buffer will have NULL (0x00) bytes written to them.
The C<$whence> parameter takes one the usual values, namely SEEK_SET,
SEEK_CUR or SEEK_END.
Returns 1 on success, 0 on failure.
=head2 binmode
Usage is
$z->binmode
binmode $z ;
This is a noop provided for completeness.
=head2 opened
$z->opened()
Returns true if the object currently refers to a opened file/buffer.
=head2 autoflush
my $prev = $z->autoflush()
my $prev = $z->autoflush(EXPR)
If the C<$z> object is associated with a file or a filehandle, this method
returns the current autoflush setting for the underlying filehandle. If
C<EXPR> is present, and is non-zero, it will enable flushing after every
write/print operation.
If C<$z> is associated with a buffer, this method has no effect and always
returns C<undef>.
B<Note> that the special variable C<$|> B<cannot> be used to set or
retrieve the autoflush setting.
=head2 input_line_number
$z->input_line_number()
$z->input_line_number(EXPR)
This method always returns C<undef> when compressing.
=head2 fileno
$z->fileno()
fileno($z)
If the C<$z> object is associated with a file or a filehandle, C<fileno>
will return the underlying file descriptor. Once the C<close> method is
called C<fileno> will return C<undef>.
If the C<$z> object is associated with a buffer, this method will return
C<undef>.
=head2 close
$z->close() ;
close $z ;
Flushes any pending compressed data and then closes the output file/buffer.
For most versions of Perl this method will be automatically invoked if
the IO::Compress::Zip object is destroyed (either explicitly or by the
variable with the reference to the object going out of scope). The
exceptions are Perl versions 5.005 through 5.00504 and 5.8.0. In
these cases, the C<close> method will be called automatically, but
not until global destruction of all live objects when the program is
terminating.
Therefore, if you want your scripts to be able to run on all versions
of Perl, you should call C<close> explicitly and not rely on automatic
closing.
Returns true on success, otherwise 0.
If the C<AutoClose> option has been enabled when the IO::Compress::Zip
object was created, and the object is associated with a file, the
underlying file will also be closed.
=head2 newStream([OPTS])
Usage is
$z->newStream( [OPTS] )
Closes the current compressed data stream and starts a new one.
OPTS consists of any of the options that are available when creating
the C<$z> object.
See the L</"Constructor Options"> section for more details.
=head2 deflateParams
Usage is
$z->deflateParams
TODO
=head1 Importing
A number of symbolic constants are required by some methods in
C<IO::Compress::Zip>. None are imported by default.
=over 5
=item :all
Imports C<zip>, C<$ZipError> and all symbolic
constants that can be used by C<IO::Compress::Zip>. Same as doing this
use IO::Compress::Zip qw(zip $ZipError :constants) ;
=item :constants
Import all symbolic constants. Same as doing this
use IO::Compress::Zip qw(:flush :level :strategy :zip_method) ;
=item :flush
These symbolic constants are used by the C<flush> method.
Z_NO_FLUSH
Z_PARTIAL_FLUSH
Z_SYNC_FLUSH
Z_FULL_FLUSH
Z_FINISH
Z_BLOCK
=item :level
These symbolic constants are used by the C<Level> option in the constructor.
Z_NO_COMPRESSION
Z_BEST_SPEED
Z_BEST_COMPRESSION
Z_DEFAULT_COMPRESSION
=item :strategy
These symbolic constants are used by the C<Strategy> option in the constructor.
Z_FILTERED
Z_HUFFMAN_ONLY
Z_RLE
Z_FIXED
Z_DEFAULT_STRATEGY
=item :zip_method
These symbolic constants are used by the C<Method> option in the
constructor.
ZIP_CM_STORE
ZIP_CM_DEFLATE
ZIP_CM_BZIP2
=back
=head1 EXAMPLES
=head2 Apache::GZip Revisited
See L<IO::Compress::FAQ|IO::Compress::FAQ/"Apache::GZip Revisited">
=head2 Working with Net::FTP
See L<IO::Compress::FAQ|IO::Compress::FAQ/"Compressed files and Net::FTP">
=head1 SEE ALSO
L<Compress::Zlib>, L<IO::Compress::Gzip>, L<IO::Uncompress::Gunzip>, L<IO::Compress::Deflate>, L<IO::Uncompress::Inflate>, L<IO::Compress::RawDeflate>, L<IO::Uncompress::RawInflate>, L<IO::Compress::Bzip2>, L<IO::Uncompress::Bunzip2>, L<IO::Compress::Lzma>, L<IO::Uncompress::UnLzma>, L<IO::Compress::Xz>, L<IO::Uncompress::UnXz>, L<IO::Compress::Lzop>, L<IO::Uncompress::UnLzop>, L<IO::Compress::Lzf>, L<IO::Uncompress::UnLzf>, L<IO::Uncompress::AnyInflate>, L<IO::Uncompress::AnyUncompress>
L<IO::Compress::FAQ|IO::Compress::FAQ>
L<File::GlobMapper|File::GlobMapper>, L<Archive::Zip|Archive::Zip>,
L<Archive::Tar|Archive::Tar>,
L<IO::Zlib|IO::Zlib>
For RFC 1950, 1951 and 1952 see
L<http://www.faqs.org/rfcs/rfc1950.html>,
L<http://www.faqs.org/rfcs/rfc1951.html> and
L<http://www.faqs.org/rfcs/rfc1952.html>
The I<zlib> compression library was written by Jean-loup Gailly
C<gzip@prep.ai.mit.edu> and Mark Adler C<madler@alumni.caltech.edu>.
The primary site for the I<zlib> compression library is
L<http://www.zlib.org>.
The primary site for gzip is L<http://www.gzip.org>.
=head1 AUTHOR
This module was written by Paul Marquess, C<pmqs@cpan.org>.
=head1 MODIFICATION HISTORY
See the Changes file.
=head1 COPYRIGHT AND LICENSE
Copyright (c) 2005-2018 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or
modify it under the same terms as Perl itself.