|
Linux altar53.supremepanel53.com 4.18.0-553.8.1.lve.el8.x86_64 #1 SMP Thu Jul 4 16:24:39 UTC 2024 x86_64
/ usr/ include/ libnl3/ netlink/ |
|
|
/* SPDX-License-Identifier: LGPL-2.1-only */
/*
* Copyright (c) 2003-2012 Thomas Graf <tgraf@suug.ch>
*/
#ifndef NETLINK_UTILS_H_
#define NETLINK_UTILS_H_
#include <netlink/netlink.h>
#include <netlink/list.h>
#ifdef __cplusplus
extern "C" {
#endif
#if defined(__GNUC__) && __GNUC__ > 5
#define _nl_attribute_printf(a, b) __attribute__((__format__(printf, a, b)))
#else
#define _nl_attribute_printf(a, b)
#endif
/**
* @name Probability Constants
* @{
*/
/**
* Lower probability limit
* @ingroup utils
*/
#define NL_PROB_MIN 0x0
/**
* Upper probability limit nl_dump_type
* @ingroup utils
*/
#define NL_PROB_MAX 0xffffffff
/** @} */
enum {
NL_BYTE_RATE,
NL_BIT_RATE,
};
/* unit pretty-printing */
extern double nl_cancel_down_bytes(unsigned long long, char **);
extern double nl_cancel_down_bits(unsigned long long, char **);
extern int nl_rate2str(unsigned long long, int, char *, size_t);
extern double nl_cancel_down_us(uint32_t, char **);
/* generic unit translations */
extern long nl_size2int(const char *);
extern char * nl_size2str(const size_t, char *, const size_t);
extern long nl_prob2int(const char *);
/* time translations */
extern int nl_get_user_hz(void);
extern int nl_get_psched_hz(void);
extern uint32_t nl_us2ticks(uint32_t);
extern uint32_t nl_ticks2us(uint32_t);
extern int nl_str2msec(const char *, uint64_t *);
extern char * nl_msec2str(uint64_t, char *, size_t);
/* link layer protocol translations */
extern char * nl_llproto2str(int, char *, size_t);
extern int nl_str2llproto(const char *);
/* ethernet protocol translations */
extern char * nl_ether_proto2str(int, char *, size_t);
extern int nl_str2ether_proto(const char *);
/* IP protocol translations */
extern char * nl_ip_proto2str(int, char *, size_t);
extern int nl_str2ip_proto(const char *);
/* Dumping helpers */
extern void nl_new_line(struct nl_dump_params *);
extern void nl_dump(struct nl_dump_params *, const char *, ...) _nl_attribute_printf(2, 3);
extern void nl_dump_line(struct nl_dump_params *, const char *, ...) _nl_attribute_printf(2, 3);
enum {
NL_CAPABILITY_NONE,
/**
* rtnl_route_build_msg() no longer guesses the route scope
* if explicitly set to RT_SCOPE_NOWHERE.
* @ingroup utils
*/
NL_CAPABILITY_ROUTE_BUILD_MSG_SET_SCOPE = 1,
#define NL_CAPABILITY_ROUTE_BUILD_MSG_SET_SCOPE NL_CAPABILITY_ROUTE_BUILD_MSG_SET_SCOPE
/**
* rtnl_link_veth_get_peer() now returns a reference that is owned by the
* caller and must be released by the caller with rtnl_link_put().
*/
NL_CAPABILITY_ROUTE_LINK_VETH_GET_PEER_OWN_REFERENCE = 2,
#define NL_CAPABILITY_ROUTE_LINK_VETH_GET_PEER_OWN_REFERENCE NL_CAPABILITY_ROUTE_LINK_VETH_GET_PEER_OWN_REFERENCE
/**
* rtnl_u32_add_action() and rtnl_basic_add_action() now grab a reference to act
* caller are free to release its own
*/
NL_CAPABILITY_ROUTE_LINK_CLS_ADD_ACT_OWN_REFERENCE = 3,
#define NL_CAPABILITY_ROUTE_LINK_CLS_ADD_ACT_OWN_REFERENCE NL_CAPABILITY_ROUTE_LINK_CLS_ADD_ACT_OWN_REFERENCE
/**
* Indicate that the local port is unspecified until the user accesses
* it (via nl_socket_get_local_port()) or until nl_connect(). More importantly,
* if the port is left unspecified, nl_connect() will retry generating another
* port when bind() fails with ADDRINUSE.
*/
NL_CAPABILITY_NL_CONNECT_RETRY_GENERATE_PORT_ON_ADDRINUSE = 4,
#define NL_CAPABILITY_NL_CONNECT_RETRY_GENERATE_PORT_ON_ADDRINUSE NL_CAPABILITY_NL_CONNECT_RETRY_GENERATE_PORT_ON_ADDRINUSE
/**
* Indicate that rtnl_link_get_kernel() fails with -NLE_OPNOTSUPP in case
* of older kernals not supporting lookup by ifname. This changes behavior
* from returning -NLE_INVAL to return -NLE_OPNOTSUPP.
*/
NL_CAPABILITY_ROUTE_LINK_GET_KERNEL_FAIL_OPNOTSUPP = 5,
#define NL_CAPABILITY_ROUTE_LINK_GET_KERNEL_FAIL_OPNOTSUPP NL_CAPABILITY_ROUTE_LINK_GET_KERNEL_FAIL_OPNOTSUPP
/**
* Also consider the a_cacheinfo field (ADDR_ATTR_CACHEINFO) that contains the
* address timestamps and expiry when comparing struct rtnl_addr objects with
* nl_object_diff().
*/
NL_CAPABILITY_ROUTE_ADDR_COMPARE_CACHEINFO = 6,
#define NL_CAPABILITY_ROUTE_ADDR_COMPARE_CACHEINFO NL_CAPABILITY_ROUTE_ADDR_COMPARE_CACHEINFO
/**
* The library version is libnl3 3.2.26 or newer. This capability should never be backported.
*/
NL_CAPABILITY_VERSION_3_2_26 = 7,
#define NL_CAPABILITY_VERSION_3_2_26 NL_CAPABILITY_VERSION_3_2_26
/**
* nl_recv() fails with NLE_MSG_TRUNC if a message got truncated
* with NL_MSG_PEEK disabled. Previously, the failed message was wrongly
* discarded and the next message received.
*/
NL_CAPABILITY_NL_RECV_FAIL_TRUNC_NO_PEEK = 8,
#define NL_CAPABILITY_NL_RECV_FAIL_TRUNC_NO_PEEK NL_CAPABILITY_NL_RECV_FAIL_TRUNC_NO_PEEK
/**
* rtnl_link_build_change_request() and rtnl_link_change() would set ifi.ifi_flags but leave
* ifi.ifi_change at zero. This was later fixed to set ifi.ifi_change to the flags that are actually
* set in changes.
*/
NL_CAPABILITY_LINK_BUILD_CHANGE_REQUEST_SET_CHANGE = 9,
#define NL_CAPABILITY_LINK_BUILD_CHANGE_REQUEST_SET_CHANGE NL_CAPABILITY_LINK_BUILD_CHANGE_REQUEST_SET_CHANGE
/**
* Between 3.2.14 (64fcb47a36ec12d7e7f00605f6a8952ce985dd08) and 3.2.22 (8571f58f23763d8db7365d02c9b27832ad3d7005),
* rtnl_neigh_get() behaved differently and only returned objects with family AF_UNSPEC.
* This capability indicates, that the function was fixed. The absense of the capability,
* doesn't indicate however which behavior the function will have. So beware. */
NL_CAPABILITY_RTNL_NEIGH_GET_FILTER_AF_UNSPEC_FIX = 10,
#define NL_CAPABILITY_RTNL_NEIGH_GET_FILTER_AF_UNSPEC_FIX NL_CAPABILITY_RTNL_NEIGH_GET_FILTER_AF_UNSPEC_FIX
/**
* The library version is libnl3 3.2.27 or newer. This capability should never be backported.
*/
NL_CAPABILITY_VERSION_3_2_27 = 11,
#define NL_CAPABILITY_VERSION_3_2_27 NL_CAPABILITY_VERSION_3_2_27
/**
* Properly serialize vlan protocol IFLA_VLAN_PROTOCOL.
*/
NL_CAPABILITY_RTNL_LINK_VLAN_PROTOCOL_SERIALZE = 12,
#define NL_CAPABILITY_RTNL_LINK_VLAN_PROTOCOL_SERIALZE NL_CAPABILITY_RTNL_LINK_VLAN_PROTOCOL_SERIALZE
/**
* Properly read gre REMOTE port.
*/
NL_CAPABILITY_RTNL_LINK_PARSE_GRE_REMOTE = 13,
#define NL_CAPABILITY_RTNL_LINK_PARSE_GRE_REMOTE NL_CAPABILITY_RTNL_LINK_PARSE_GRE_REMOTE
/**
* Don't skip over vlan ingress-map entries with "to" field zero when serializing
* a netlink message. Previously such entires would be ignored which inhibits the
* user from clearing ingress map entries.
*/
NL_CAPABILITY_RTNL_LINK_VLAN_INGRESS_MAP_CLEAR = 14,
#define NL_CAPABILITY_RTNL_LINK_VLAN_INGRESS_MAP_CLEAR NL_CAPABILITY_RTNL_LINK_VLAN_INGRESS_MAP_CLEAR
/**
* Consider vxlan link info for nl_object_diff().
*/
NL_CAPABILITY_RTNL_LINK_VXLAN_IO_COMPARE = 15,
#define NL_CAPABILITY_RTNL_LINK_VXLAN_IO_COMPARE NL_CAPABILITY_RTNL_LINK_VXLAN_IO_COMPARE
/**
* Support 64 bit attributes for nl_object_diff().
*/
NL_CAPABILITY_NL_OBJECT_DIFF64 = 16,
#define NL_CAPABILITY_NL_OBJECT_DIFF64 NL_CAPABILITY_NL_OBJECT_DIFF64
/**
* Support omitting @key argument to xfrmnl_sa_get_*_params() to check
* for required buffer size for key.
*/
NL_CAPABILITY_XFRM_SA_KEY_SIZE = 17,
#define NL_CAPABILITY_XFRM_SA_KEY_SIZE NL_CAPABILITY_XFRM_SA_KEY_SIZE
/**
* Properly handle nl_object_identity() for AF_INET and AF_INET6 addresses
* and properly handle the peer/IFA_ADDRESS for IPv4 addresses.
*/
NL_CAPABILITY_RTNL_ADDR_PEER_FIX = 18,
#define NL_CAPABILITY_RTNL_ADDR_PEER_FIX NL_CAPABILITY_RTNL_ADDR_PEER_FIX
/**
* The library version is libnl3 3.2.28 or newer. This capability should never be backported.
*/
NL_CAPABILITY_VERSION_3_2_28 = 19,
#define NL_CAPABILITY_VERSION_3_2_28 NL_CAPABILITY_VERSION_3_2_28
/**
* After NL_CAPABILITY_RTNL_ADDR_PEER_FIX, a follow up regression to lookup
* IPv4 addresses in the cache was fixed (PR#105).
*/
NL_CAPABILITY_RTNL_ADDR_PEER_ID_FIX = 20,
#define NL_CAPABILITY_RTNL_ADDR_PEER_ID_FIX NL_CAPABILITY_RTNL_ADDR_PEER_ID_FIX
/**
* nl_addr_fill_sockaddr() properly checks that the provided address to
* avoid read-out-of-bounds for invalid addresses.
*/
NL_CAPABILITY_NL_ADDR_FILL_SOCKADDR = 21,
#define NL_CAPABILITY_NL_ADDR_FILL_SOCKADDR NL_CAPABILITY_NL_ADDR_FILL_SOCKADDR
/**
* Support omitting @ctx_str argument to xfrmnl_sa_get_sec_ctx() to check
* for required buffer size for context string.
*/
NL_CAPABILITY_XFRM_SEC_CTX_LEN = 22,
#define NL_CAPABILITY_XFRM_SEC_CTX_LEN NL_CAPABILITY_XFRM_SEC_CTX_LEN
/**
* rtnl_link_build_add_request() would set ifi.ifi_flags but leave ifi.ifi_change at zero.
* This was later fixed to set ifi.ifi_change to the flags that are actually
* set
*/
NL_CAPABILITY_LINK_BUILD_ADD_REQUEST_SET_CHANGE = 23,
#define NL_CAPABILITY_LINK_BUILD_ADD_REQUEST_SET_CHANGE NL_CAPABILITY_LINK_BUILD_ADD_REQUEST_SET_CHANGE
/* Older versions of libnl3 would not use MSG_PEEK for nl_recvmsgs() unless calling
* nl_socket_enable_msg_peek(). Instead, the user had to specify the buffer size via
* nl_socket_set_msg_buf_size(), which in turn would default to 4*getpagesize().
*
* The default value might not be large enough, so users who were not aware of the
* problem easily ended up using a too small receive buffer. Usually, one wants to
* avoid MSG_PEEK for recvmsg() because it requires an additional syscall.
*
* Now, as indicated by this capability, nl_recvmsgs() would use MSG_PEEK by default. The
* user still can explicitly disable MSG_PEEK by calling nl_socket_disable_msg_peek() or
* by setting the nl_socket_set_msg_buf_size() to a non-zero value.
*/
NL_CAPABILITY_NL_RECVMSGS_PEEK_BY_DEFAULT = 24,
#define NL_CAPABILITY_NL_RECVMSGS_PEEK_BY_DEFAULT NL_CAPABILITY_NL_RECVMSGS_PEEK_BY_DEFAULT
/**
* The library version is libnl3 3.2.29 or newer. This capability should never be backported.
*/
NL_CAPABILITY_VERSION_3_2_29 = 25,
#define NL_CAPABILITY_VERSION_3_2_29 NL_CAPABILITY_VERSION_3_2_29
/**
* Support omitting @ctx_str argument to xfrmnl_sp_get_sec_ctx() to check
* for required buffer size for context string.
*/
NL_CAPABILITY_XFRM_SP_SEC_CTX_LEN = 26,
#define NL_CAPABILITY_XFRM_SP_SEC_CTX_LEN NL_CAPABILITY_XFRM_SP_SEC_CTX_LEN
/**
* The library version is libnl3 3.3.0 or newer. This capability should never be backported.
*/
NL_CAPABILITY_VERSION_3_3_0 = 27,
#define NL_CAPABILITY_VERSION_3_3_0 NL_CAPABILITY_VERSION_3_3_0
/**
* The library version is libnl3 3.4.0 or newer. This capability should never be backported.
*/
NL_CAPABILITY_VERSION_3_4_0 = 28,
#define NL_CAPABILITY_VERSION_3_4_0 NL_CAPABILITY_VERSION_3_4_0
/**
* Fixed memory corruption in rtnl_link_vlan_set_egress_map(). Previously, if you tried
* to add more then 4 mappings, a buffer overflow occured. Also fixed nl_object_clone()
* for VLAN links.
*/
NL_CAPABILITY_ROUTE_FIX_VLAN_SET_EGRESS_MAP = 29,
#define NL_CAPABILITY_ROUTE_FIX_VLAN_SET_EGRESS_MAP NL_CAPABILITY_ROUTE_FIX_VLAN_SET_EGRESS_MAP
/**
* The library version is libnl3 3.5.0 or newer. This capability should never be backported.
*/
NL_CAPABILITY_VERSION_3_5_0 = 30,
#define NL_CAPABILITY_VERSION_3_5_0 NL_CAPABILITY_VERSION_3_5_0
/**
* nl_object_identical() can consider objects identical, if they both lack the same
* set of ID attributes.
*/
NL_CAPABILITY_NL_OBJECT_IDENTICAL_PARTIAL = 31,
#define NL_CAPABILITY_NL_OBJECT_IDENTICAL_PARTIAL NL_CAPABILITY_NL_OBJECT_IDENTICAL_PARTIAL
/**
* The library version is libnl3 3.6.0 or newer. This capability should never be backported.
*/
NL_CAPABILITY_VERSION_3_6_0 = 32,
#define NL_CAPABILITY_VERSION_3_6_0 NL_CAPABILITY_VERSION_3_6_0
/**
* The library version is libnl3 3.7.0 or newer. This capability should never be backported.
*/
NL_CAPABILITY_VERSION_3_7_0 = 33,
#define NL_CAPABILITY_VERSION_3_7_0 NL_CAPABILITY_VERSION_3_7_0
__NL_CAPABILITY_MAX,
NL_CAPABILITY_MAX = (__NL_CAPABILITY_MAX - 1),
#define NL_CAPABILITY_MAX NL_CAPABILITY_MAX
/**
* The range 0x7000 to 0x7FFF is reserved for private capabilities. Upstream libnl3 will
* not register capabilities in this range. However, instead of adding private capabilities,
* better register their number with upstream libnl3. */
#define NL_CAPABILITY_IS_USER_RESERVED(cap) ( ((cap) & ~0x0FFF) == 0x7000 )
};
int nl_has_capability (int capability);
#ifdef __cplusplus
}
#endif
#endif